Honda Civic Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
19 Posts
Discussion Starter #1
I'm curious to know whether these (springs and dampers, F&R) are interchangeable, and more importantly if anyone has done this before.

I realise the spring rates will be different, and the 1.7 CDTI engine is probably a bit heavier than the K20, so if anyone has done this and can give their feedback, I'd be really grateful.

I use a Whiteline rear ARB and it made a really big improvement, but the stock setup is really hard yet it doesn't handle that well, so I think Honda got the spring rate and damping quite wrong. I've driven 3 and they're all the same.

I read that one user (Squirrelking) installed Eibach springs, so that might be the best way to go, but if it's overdamped, the ride would still be crashy.
 
1 - 1 of 1 Posts
Top