Honda Civic Forums banner

1 - 20 of 814 Posts

·
Registered
Joined
·
1,145 Posts
Discussion Starter #1
heyya guys this is my eg it started life as a 1.6 esi vtec with aircon, this is the model i was searching for a long time beacouse of the rear discs on its own it makes it such a good car to modd and allso the d16z6 are good for boost wich is what i was going to be doing in the near future, but changed my mind i just love how the b series engine perform, with such little modds good power gains low end and top end, my intentions wernt to modd the engine it was mainly just for show but thanks to dom and nick at ENDLESS HORIZON that changed very quickly after they done out turbo conversion on the ep3 i knew from that point i need to get some more power so i went for the b16a2 not just for power for all round its a big upgrade from the z6 witch suits me as later on i do plan on b18 internals but im happy with this at the moment so cheers guys for makeing me spending money ha,and also thanks for all advise over the past couple of years ,but the style i went for well to say the least it has changed over and over again with a mixture of all different types but mainly i am trying to get back on track and go back to the clean look with some subtle body mods front lip rear lip ek9 sideskirts rota grids i think they suit the car well btu hey enough of my life story heres some piccs and a current specc list !

ENGINE ....
.b16a2 conversion (rebuilt with new seals ,sprayed 12/04.2011 )
.b18c4 cams
.b18c4duel valve springs
.b18c4 retainers
.hks plugs
.8cm black magnacore ht leads
.ecu chipped and re-mapped with a redline of 9800rpm
.vtec changed to 5000rpm to 9800rpm
.toda racing red cambelt kit
.anodised purple fuel rail
.blox billet cam seal (black)
.blox billet fuel pressure regulator(anodised blue)
.titanuim 3"intake chamber with universal filter
.toyo thick alloy rad
.full heat wrapped from manifold - backbox
.custom 2.5" stainless manifold
.5"custom stainless backbox (apexi style )
.2.5" custom stainless de-cat
.custom 2.5" cat back
.password jdm anodised purple rocker cover nuts
.password jdm anodised purple vtec soleniod cover
.password jdm anodised purple rad stay
.earths changed to buddyclub
.front daiyama coilovers
.rear gaz coilovers
.blox magnetic anodised gold sump plug
.blox magnetic anodised gold gearbox plug
.ac technik anodised silver rad hose temp sender
.blue silicone hoses
.purple silicone hoses
.aftermarket positive and negative terminals
.spoon yellow rocker cover

EXTERIOR.....
.full respray in spoon yellow
.replaced rear arches
.16"rota grids in bronze with toyo proxies all round (with rays stickers (i like them ))
.team heko wind deflectors
.engine bay smoothed
.engine bay mild wire tuck
.engine bay sprayed in midnight purple
.all engine bay and bumper and wings bolts changed to anodised red and purple bolts
.megan racing tie bar anodised blue
.spoon resivour covers
.d2 lower control arms
.password jdm anodised purple battary tie down bar
.skunk 2 resivour covers
.ek9 sideskirts modified to fit
.mugen style front lip
.vis oem carbon bonnet
.spoon carbon fibre duckbill spoiler
.genuine spoon carbon mirrors
.vis import style boot
.custom made carbon door pillers
.carbon fibre fuse box cover
.passwrd jdm anodised purple rad stay
.password jdm anodised front tow hook
.password jdm anodised purple rear tow hook
.password jdm anodised purple vtec soleniod cover
.calipers done in red
.type r style rear lip
.jdm rear light conversion
.ek9 top front strut brace
.jdm stickers
.jdm style plates
.jdm plate front holder
.de-wipered with anodised purple bung

INTERIOR.....
.spoon rep rear strut brace
.c piller bar brace
.rare integra si front black pass seat
.recaro evo 5 driver seat
.blox gear knob anodised purple
.nardi classic steering wheel
.sparco red harneses
.jdm lower sterio dash piece
.recaro red door inserts
,black dc2 gear knob with red numbers
.black gear gaitor with red stitching
.rear interior stripped out
.black accoustic carpet fitted to the rear
.custom rear speaker brackets
.completly sprayed the inside of the car black with purple glitter (and not gary )
.alpine iphone cd player with iphone lead
.jl audio 1200w rms subwoofer
.jbl 1500w rms amplifier
.4gauge wiring
.alpine 200w rms front door speakers
.alpine 200w rms rear speaker mounted on custom made brackets
.pgold tweeters
.momo steering wheel
.nrg boss adaptor kit
.oem civic embroided car matts
.carbon fibre dash bits

FIRST PICCS







all comments welcome more piccs to follow
 

·
Registered
Joined
·
943 Posts
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

Looks like a good little project, looking forward to seeing the mods coming along! :D
 

·
Registered
Joined
·
1,145 Posts
Discussion Starter #5
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

yeah the more the better ill upload sum picc of my mates eg k20 its awesome and carl how did u do the sig with the eg i got a picc from manga cars and im trying to get the size rite looks cool mate
 

·
Premium Member
Joined
·
5,629 Posts
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

i used photoshop cs3 and went over the full car pixel by pixel just zoomed right in on it and guessed the colour of my car and ever layer it got lighter i chose a lighter shade of green ect and guessed the alloys just slapped some white on tinted the windows ect if it was any more complicated like tryign to draw a bodykit i would have gave up it took about a hour and did my head in tbh lol but it looks cool so it was worth it
 

·
Registered
Joined
·
1,145 Posts
Discussion Starter #7
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

ahh excrement yeah im using a different programme called photobie lol mines nearly done now

Edit:

finaly got an update wahoo

.halfrauds cheapo induction kit
.skunk 2 resiviour covers
.takata green 15" alloys
.cobra 4"jap style exhaust (wirth a bit of angle for the dangle lol)
.my company stickers
.radiator stay in takata green
.front honda badge in takata green
. momo gear knob
heres some piccs






i will be updating it tomoro as iv got ek9 sideskirts and a vti front lip to fit also a decent induction kit lol
thanks for looking

Edit:

got a few things done today got my spoon red anodised wheel nuts on and my wheels and re-welded my exhaust for more angle lol i sprayed my rocker cover and loads of little brackets in takata green looks pretty good piccs up tomoro
 

·
Registered
Joined
·
1,145 Posts
Discussion Starter #8
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

right heres BIG UPDATE I FINALY GOT MY SPOON DUCKBILL SPOILER AND I GOT MY MEGEN RACING TIE BAR AND MY JDM GRAPHIX SOME CARBON BITTS AND MY EK9 SIDESKIRTS WITH A VTI LIP HERES SOME PICS














ALL COMMENTS WELCOME
 

·
Registered
Joined
·
32 Posts
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

nice, very nice :)
can i just ask, how did you get the original spoiler off?
i bet its really easy but i cant work it out.
any help would be very greatful :)
thanks
 

·
Registered
Joined
·
1,145 Posts
Discussion Starter #15
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

well when you open the window part of the boot ur see 4 bolts if i remeber rite there 10mm then take them off and then u can lift the spoiler off hope this helps dude cheers
 

·
Registered
Joined
·
1,145 Posts
Discussion Starter #18
Re: CIVIC EG ESI 1.6VTEC PROJECT !!

yer i gave the boot a little polish today and its amazing the difference allso iv just finished my airbox its all smooth and shiny black now does look 1000x better but i myt get a decent induction kit still lol
yer there my fave spoilers i wouldnt have any other on it
 
1 - 20 of 814 Posts
Top