Honda Civic Forums banner
1 - 1 of 1 Posts

1 Posts
Discussion Starter · #1 ·
Hello everyone,

I've got a DC5 and my servo's leaking out its arse. Can someone please measure some distances for me so I can see if an EP3 servo will fit a DC5? PLEEEEASE . . .

Distance between the 4 mounting studs for the servo (in the footwell, behind the brake pedal), so let's say between the top left stud and the top right + the top left stud and bottom left.
The distance between the master cylinder mounting studs (on the front of the servo).
Also, what's the diameter of the bore in your brake master cylinder (should be embossed on the underside of the master cylinder, taking a video/photo is the easiest way)

I know I'm being a pain so I thank you in advance.
1 - 1 of 1 Posts