Honda Civic Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
2 Posts
Hi there

I have same problem
I bought honda civic 2012 week ago and now I have the same flushing lights like you
I replaced all tyres for new but didn't help
If you find out what cause the problem please let me know I will be very thankful to you
 

·
Registered
Joined
·
2 Posts
Are you able to manually initialise the tyre pressure at all? I managed to once and it turned off everything, if you keep driving with the lights they eventually turn off so I believe it's either a knackered ABS sensor (I believe these do your tyre pressure too) or apparently on early 2012 models there's an ECU update where it basically increases the parameters of the tyre deflation warning by 300% as they're too sensitive from factory apparently, I'm taken mine to a tyre/tracking etc specialist tomorrow where they're gonna test the theory for me
My problem started with 1 warning light tyre presure and the same day litlle bit later with a warning light control stability and power stering light.
I found out that I have a puncture on tyre and different brand between them so I replace all tyres for new the same brand.
I was able initialise tyre pressure after change but second day the warning lights came back and then I tried to initialise warning tyre presure light but unsecsesfull I couldn't do it .
Warning Lights go off after I turn off the button for stability control but after I drive it comes back and it's still there.
I see that it is not easy to sourt out this problem after you visited 4 garages.
I don't know, my next step will probably be to try to replace ABS sensor first or wait and study a bit more about it, It's so annoing to drive with this lights on.
Thanks for now for your advise
 
1 - 2 of 2 Posts
Top